02 September 2014

Skateboard (Fingerboard)





skateboard
Skateboard (Fingerboard)


       A Skateboard (Fingerboard) is a working replica (about 1:8 scaled) of a skateboard that a person "rides" by replicating skateboarding maneuvers with their hand. It can also be referred to as a fingerskate or finger skateboard. The device itself is a scaled-down skateboard complete with moving wheels, graphics and trucks. A fingerboard is commonly around 10 centimeters long, and can have a variety of widths going from 29 to 33mm (or more). 

Skateboard tricks may be performed using fingers instead of feet. Tricks done on a fingerboard are inspired by tricks done on real skateboards. Cam Fox Bryant is widely credited as making the first fingerboard, and his skit in Powell-Peralta's "Future Primitive" video brought fingerboarding to the skateboarders of the world in the mid-1980s. Around the same time, he wrote an article on how to make fingerboards in TransWorld SKATEboarding magazine.

Although fingerboarding was a novelty within the skateboarding industry for years, as skateboarding reach enormous and widespread popularity in the late 1990s, the folks at toymaker Spin Master realized the potential for the toys, and specifically for products bearing the logos and branding of real skateboard brands. Their Tech Deck brand caught on during this period and has grown into a widely recognized brand itself in the toy business. Toy fingerboards like the ones Tech Deck manufactures are now available as inexpensive novelty toy as well as high-end collectible, complete with accessorie one would find in use with standard-size skateboard. Fingerboards are also used by skateboarders as 3-D model visual aids to understand potential tricks and maneuvers; many users make videos to document their efforts.

Similar to fingerboarding, although less popular, handboarding is a scaled-down version of a skateboard that a user controls with their hands.


skateboard


History
       Fingerboards were first created as homemade toys in the late 1960s and later became a novelty attached to keychains in skate shops (but were also mentioned as a model for a skateboard.) In the 1985 Powell-Peralta skateboarding video "Future Primitive," Lance Mountain rode a homemade fingerboard in a double-bin sink. It is widely accepted that this is where the idea for the Animal Chin ramp came from. Some consider this the earliest fingerboard footage available for public viewing. That homemade fingerboard was built from wood, tubes, and toy train axles.

Fingerboards have been a peripheral part of the skateboarding industry since the late 1980s and were originally marketed as keychains. Although barely "rideable," they were improved upon by the Tech Deck brand which mass-produced a "rideable" miniature skateboard. The first entertainment licensed fingerboards were introduced by Bratz Toys, released through a Hong Kong-based toy company named Prime Time Toys, and designed by Pangea, the company that helped develop the Teenage Mutant Ninja Turtles toy line for Playmates Toys. 

The designs were harnessed from entertainment properties such as "Speed Racer," "Woody Woodpecker," "NASCAR," "Heavy Metal," and "Crash Bandicoot." The licensed boards drove the Tech Deck brand into licensing strong urban brands, rather than simply creating their own designs. In the late 1990s, as fingerboards became more prominent outside the skateboarding community, X-Concepts' Tech Decks licensed "actual pro graphics from major skateboard brands" riding "the 1999 fingerboard wave right into Wal-Mart and other major outlets." 

In 1999 there was a Tech Deck fashion of collecting one of each design similar to the Beanie Baby fad months prior. Thus, Tech Deck, and its distributors at Spin Master Toys, suddenly found themselves a large market to milk. Entertainment-based fingerboard brands couldn't compete against the urban juggernaut, and eventually disappeared. Other "major players in the skateboard industry" soon followed in hopes of reaping profits as young toy-playing children would choose to take up fingerboarding. 

More modern fingerboards feature "interchangeable wheels and trucks, a fairly accurate scale size, and pad-printed graphics reproduced from the most popular skateboard companies in the business." They thus developed the fingerboard into a collectible toy and the practice into a "form of mental skating".

Fingerboarding is a good match for videography as the action can be controlled and framing the activity offers opportunities for creativity. With the rise of the online video business from early 2006, fueled, in part, because the feature that allows e-mailing clips to friends, several thousand finger board and handboard videos can now be found on popular video-sharing sites such as YouTube. 

Thus even if the weather does not permit a skateboarder to practice outside they could try a potential trick with their scaled-down fingerboard and related items and share the video with whomever they wished.


skateboard


Usage
       Fingerboards are used by a range of people from those utilizing them as toys to skateboarding and related sports professionals envisioning not only their own skating maneuvers but for others as well and can include the use for planning out competition courses as skating boarding develops into an international sport. 

Similar to train enthusiasts building railway models, fingerboard hobbyists often construct and purchase reduced scale model figures that would be considered natural features to an urban skateboarder such as handrails, benches, and stairs they would be likely to encounter while riding. In addition users might build and buy items seen in a skatepark including half-pipes, quarter pipes, trick boxes, vert ramps, pyramids, banked ramps, full pipes, and any number of other trick-oriented objects. 

These objects can be used simply for enjoyment and also to assist the visualization of skateboarding tricks or the "flow" from one trick to the next (or to create "lines"). Fingerboarding events feature some of the latest elaborate models and accessories; many of the manufacturers features photos and videos on their websites.


skateboard


Components
       The parts of a fingerboard are: deck, tape (grip, rip, riptape...), trucks, bushings, king pins, and wheels. The trucks and decks can easily be modified (modding) to reduce weight, improve smoothness or look better. Modding tutorials can be found online. 

Decks are the major component of a board and where, on a standard skateboard, one would stand. There is a wide variety of decks with material ranging from wood to plastic, to paper. Most commonly, decks are made out of wood, as this gives it more "pop" and a more authentic feel. The average deck will have two kicks - a flared end used for leveraging the board - while some old-school models have only one end flared. During the early stages of the fingerboarding scene, decks traditionally had lower kicks like that of a Berlinwood Old Mold or a Tech Deck however, the "default" shape nowadays has medium kicks and low concave. Some decks have higher kicks, like Aphlikshun's K Deck, and if the kicks are very steep, they are referred to as "wall kicks". Some companies offer complete custom fingerboards, such as, which type of shape, or ply they want.

Griptape is the friction tape adhered to the topside of the deck to enable users to more easily maintain control of the deck. There are many types of griptape. Some use standard skateboard griptape although the griptape may wear out faster on fingerboards as they endure more moisture from sweat and oils from user's hands. There are also softer alternatives and grippy tape which is less harsh on a user's fingers allowing them to fingerboard for longer periods of time. Examples of this tape are Riptape, FBS Extra Smooth, No Comply Foamy Greatness, and Yellowood's Slim Tape. 

Trucks are the structures attached to the bottom of the deck that house the wheels and bushings. Some trucks are all one molded piece while others are scaled-down versions of regular skateboard trucks. Example: BRR Trucks, Y-Trucks. As fingerboarding has evolved "collector" and "pro" versions have emerged with some brands shaped using special instruments to make them lighter and look better. 

Bushings are pliable material that provide the cushion mechanism for turning a standard skateboard but on a fingerboard help stabilize the trucks thus keeping the wheels in the same position to enable stronger tricks and visual appeal. Collector and "pro" brand bushings are made from many different types of squishy material, usually rubberized plastic or rubber. The wheels can determine how smooth the ride is thus what kind of "flow" a user's ride can be. 

The professional brands are traditionally made out of a variety of different materials, and have small ball-bearings inside the bearings to enhance the smoothness. A couple examples of these wheels, Flatface Wheels, Oak Wheels, and Winkler Wheels.

Tech Deck makes hard plastic also wooden skateboards skateboards and borrows designs from many well-known skateboard manufacturers, such as Blind, Flip, and Element. They use grip tape, and professional graphics. The stock trucks on Tech Decks are made of die-cast metal and have two separate axles for the wheels to roll on. The wheels are made out of plastic along with the bushings. Some fingerboarders prefer the feel and performance of decks made from wood. 

Wooden decks can be made from 3-7 plies of a given veneer; maple, walnut, and mahogany being the most popular. All of the hole-drilling and shaping is done by hand or with the aid of a machine, thus the price is higher. A wooden deck from a popular company can have a low to high price range usually depending on the quality of the deck you are going to purchase, prices range from 10 - $52 USD. Wooden fingerboard makers are now offering custom designs- you can chose from their line of graphics or send in your own. 

The wooden boards come in a variety of widths from 26 - 32mm and concave can vary greatly from maker to maker. Some companies offer even more customization options such as the choosing of the plies used to go into the deck, as well as the width/length of the deck. Along with wooden decks, advanced fingerboarder's also tend to prefer bearing wheels to plastic. Bearing wheels can be made from a range of materials such as teflon, urethane, silicon, fiberglass, and even clay. The wheels are usually put into a lathe to ensure the best shape. 

Once the wheels have been readied, bearings are put into place to increase the smoothness of the wheels rolling on the axle. Tuning screws for the wheels cause the wheels to roll more smoothly. Rather than using the stock axles and kingpins that come on Tech Deck trucks, some more advanced fingerboards use tuning screws, softer 'foam griptape' and custom kingpins to ensure that wheels and hangars are more properly secured. Example: Blackriver Trucks and YTrucks. Board rails can be added to the deck bottom similar to those used on a standard skateboard. Fingerboards made with plastic are sometimes modified by heating the plastic to shape it such as making the kicks higher or adding concavity.


skateboard


Bags 
       Small bags for fingerboards and hardware protect your equipment. FlashBone Bags was the first company (Designer Milan Malagan) who developed these bags and brought them to the market as tactical bags for professional fingerboarders & wannabes. Double zipp-fastener for flexible & easy access. Velcro touch fasteners to secure your fingerboards (fits minimum 2 complete sets & 2 unmounted decks) Transparent mini-case for your small parts & tools (strapped inside). Including a carabiner (black) for clipping to your belt loop. 

Mesh pocket for accessoires with a velcro closing strap. Established in 2010 FlashBone Fingerboard Bags are the founders, first designers & producers of fingerboard bags in the world. Most of these details are inventions of FlashBones and protected.


       

No comments:

Post a Comment